于仁颇黎@机器人

所需软件：IBM lotus notes

设置步骤，因为我使用的lotus是英文版的，所以以下都用英文菜单说明.

1. 新建立一个Lotus Notes的数据文件用来保存你的gmail邮件，取名为gmail.nsf.

2. 使用client reconfiguration wizard来建立你的gmail账户.

3. 进入到address book中，选择advanced--> account,保留protocol为pop与smtp这两个account,分别点击后编辑这两个账户，具体设置内容如图所示:

     POP设置
        BASIC设置

        Advanced设置

     SMTP设置

          Basic设置

          Advanced设置

 　　设置完后就可以收取gmail邮件了，当然你要开通你的gmail的pop功能先，我的结果如下图

以下是我的firefox about:config设置，记录以作备份

network.http.pipelining=true
network.http.pipelining.maxrequests=10
network.http.proxy.pipelining=true
network.dns.disableIPv6=false
content.interrupt.parsing=true
content.max.tokenizing.time=2250000
content.notify.interval=750000
content.notify.ontimer=true
content.notify.backoffcount=5
content.switch.threshold=750000
nglayout.initialpaint.delay=0
config.trim_on_minimize=true
browser.sessionhistory.max_total_viewers=8

1.下载psptoolchain
wget http://ps2dev.org/psp/Tools/Toolchain/psptoolchain-20070626.tar.bz2
将其保存/opt目录并解包
2.安装相关的软件包
sudo apt-get install build-essential autoconf automake bison flex libncurses5-dev libreadline-dev libusb-dev texinfo
3.设置环境变量
sudo mousepad ~/.bashrc
在最后加上
export PSPDEV=/usr/local/pspdev
export PATH=$PATH:$PSPDEV/bin
4.重新加载
source ~/.bashrc
5.编译并安装psptoolcain和pspsdk
cd /opt/psptoolchain
sudo ./toolchain-sudo.sh
6.改变/usr/local/pspdev文件夹属性，加入使用的用户及组
7.检查编译器版本
psp-gcc -v
成功后会有如下输出
Using built-in specs. Target: psp Configured with: ../configure --prefix=/usr/local/pspdev --target=psp --enable-languages=c,c++ --with-newlib --enable-cxx-flags=-G0 Thread model: single gcc version 4.1.0 (PSPDEV 20060507)
8.编译测试
cd /usr/local/pspdev/psp/sdk/samples/savedata/decrypt
make
成功后会生成一个EBOOT.PBP文件。

代码:

mousepad ~/.wine/system.re

搜索： LogPixels
找到的行应该是：[System\\CurrentControlSet\\Hardware Profiles\\Current\\Software\\Fonts]
将其中的：
“LogPixels”=dword:00000060
改为：
“LogPixels”=dword:00000070

搜索： FontSubstitutes
找到的行应该是：[Software\\Microsoft\\Windows NT\\CurrentVersion\\FontSubstitutes]
将其中的：
“MS Shell Dlg”=”Tahoma”
“MS Shell Dlg 2″=”Tahoma”
改为：
“MS Shell Dlg”=”SimSun”
“MS Shell Dlg 2″=”SimSun”

拷贝simsun.ttc文件到wine中的windows/fonts下面。

　　装好Xubuntu后，一直存在着这个不能锁屏的问题，但是自己一直在忙，也懒的去弄这个事情。刚刚今天下班比较早，就来处理了一下。Google了一下，发现这是一个已经报告的bug,已经有了解决方案。

https://bugs.launchpad.net/ubuntu/+source/xfce4-utils/+bug/200665

Binary package hint: xfce4-utils
1) Ubuntu version: Xubuntu 8.04
2) Source package: xfce4-utils and xfce4-panel
3) Package version: 4.4.2-3ubuntu2
4) What you expected to happen:
    The "Lock screen" button should lock the screen.
5) What happened instead:
    It doesn't lock the screen.
6) Steps to reproduce:
    1. Right click on the Panel -> Add New Item -> Action Buttons -> Add
    2. Select action type: Lock screen
    3. Click on the "Lock screen" button in the Panel.
    4. Nothing happening.
7) Possible reason:
The "Action Buttons" panel plugin uses the /usr/bin/xflock4 script (provided by the package xfce4-utils).
This script try to use xscreensaver to lock the screen ("xscreensaver-command -lock"), but if xscreensaver isn't running, try to use gnome-screensaver ("gnome-screensaver-command --lock"), but if gnome-screensaver isn't running, try to use the "xlock" command to lock the screen.
But, by default, neither xscreensaver, nor gnome-screensaver is running, and none of the packages providing "xlock" are installed (xlockmore and xlockmore-gl).
8) Possible solutions:
- Modify the xflock4 script, to show a warning, if xscreensaver or gnome-screensaver isn't running.
OR
- Make xfce4-panel depend on xlockmore or xlockmore-gl, so it will be able to lock the screen, even if xscreensaver or gnome-screensaver isn't running.
[9) Another suggestion: May be good, to use the keyboard shortcut Ctrl+Alt+L to lock the screen. Currently Ctrl+Alt+Del is used, but it could be useful, to let lock the screen also with Ctrl+Alt+L as in GNOME and KDE.]

　　查了一下我的Xubuntu，发现没有安装xlock,下载xlockmore安装后，问题解决。xlockmore可以在这里下载：http://ftp.debian.org/debian/pool/main/x/xlockmore/xlockmore-gl_5.22-1.4_i386.deb

　　出差背两个电脑是比较辛苦的事，但是公私需要分开，使用工作的电脑处理一些私人的事情，是比较麻烦的。这种安装在ＵＳＢ上的live Linux可以方便的处理。
ＰＳ：还没有试验过，试过之后再写个report.

　　This tutorial covers the process of installing Xubuntu 8.04 to a USB flash drive from within a running (Ubuntu) Linux environment. Xubuntu uses the xfce desktop environment as opposed to Gnome or KDE. Xfce helps Xubuntu run smoother and quicker on older and slower PC's. In addition, this installation tutorial utilizes the casper persistence feature to enable changes to be saved and restored on subsequent boots. If you have access to a working Ubuntu Linux installation and your system does not have a CD drive, this tutorial is for you.

 

Basic essentials for Xubuntu 8.04 USB installation:

• Working Linux environment (we used a local Ubuntu installation)
  
• Established internet connection
  
• 1GB or larger USB flash drive
  

How to install Xubuntu 8.04 to a flash drive from Linux:

1. Insert a 1GB or larger USB flash drive (2GB+ recommended)
2. Open a terminal and type sudo su
3. As one line, type wget cdimage.ubuntu.com/xubuntu/releases/hardy/release/xubuntu-8.04-desktop-i386.iso
4. Type mount -o loop -tiso9660 xubuntu*.iso /cdrom
5. Type fdisk -l to list available drives/partitions (note which device is your flash drive I.E. /dev/sdb). Throughout this tutorial, replace all instances of x with your flash drive letter. For example, if your flash drive is sdb, replace x with b.
6. Type umount /dev/sdx1
7. Type fdisk /dev/sdx
   • type p to show the existing partition and d to delete it
   • type p again to show any remaining partitions (if partitions exist, repeat the previous step)
   • type n to make a new partition
   • type p for primary partition
     • type 1 to make this the first partition
     • hit enter to use the default 1st cylinder
     • type +750M to set the partition size
     • type a to make this partition active
     • type 1 to select partition 1
     • type t to change the partition filesystem
     • type 6 to select the fat16 file system
   • type n to make another new partition
   • type p for primary partition
     • type 2 to make this the second partition
     • hit enter to use the default cylinder
     • hit enter again to use the default last cylinder
     • type w to write the new partition table
8. Type umount /dev/sdx1 to unmount the partition
9. Type mkfs.vfat -F 16 -n xubuntu8 /dev/sdx1 to format the first partition
10. Type umount /dev/sdx2 to ensure the partition is unmounted
11. Type mkfs.ext2 -b 4096 -L casper-rw /dev/sdx2 to format the second partition
12. Remove and re-insert your flash drive (if prompted that a new medium has been detected, select to open in a new window and click ok)
13. Back at the terminal, type sudo apt-get install syslinux mtools
    
14. Type syslinux -sf /dev/sdx1
15. Type cd /cdrom
16. Type cp -rfv casper dists install pics pool preseed .disk isolinux/* md5sum.txt README.diskdefines install/mt86plus /media/xubuntu8
17. Type cd /media/xubuntu8
18. Type wget pendrivelinux.com/downloads/xu8/syslinux.cfg
19. Type cd casper
20. Type rm initrd.gz
21. Type wget pendrivelinux.com/downloads/xu8/initrd.gz
22. Reboot your computer and set your system BIOS or Boot Menu to boot from the USB stick. Save your changes and proceed to boot from the USB device

You should now be booting Xubuntu 8.04 from the memory stick and by default it should save your changes, restoring them on subsequent boots.

Notes: If your having trouble getting Ubuntu to boot, your memory stick may have a corrupted MBR. To repair the MBR of your USB device, at the terminal type sudo apt-get install lilo then type lilo -M /dev/sdx (replacing x with the letter of your flash device)

上海南站，在远处用

　　刚刚测试了一下豆瓣的相册，感觉不是很方便。因为上传图片的时候，需要一个图片一个图片的选择，非常的不方便。因为只是在最近一段时候，才开始使用网上的相册，感觉还是Picasa的图形好一些。
　　刚好豆瓣还有这个日记功能，也就是同时把这篇测试简报放在这里来了。感觉很简单，没有一个些大的变化，就是有一个ＢＵＧ，我在写日记的同时上传图片，上传完毕后自动将图片插入进来了，但是之前写的东西都没有了。
　　因此，目前这两个功能，都不会去用的。日记，还是放在我的ＢＬＯＧ上；相册，我还是用picasa.

• 豆瓣日记地址：http://www.douban.com/mine/notes
• 豆瓣相册地址：http://www.douban.com/photos/album/10393645/
• 我的Picasa: http://picasaweb.google.com/bru.qian

　　百度和谷歌，这两个搜索工具，是日常生活不可或缺的，对于百度，用的会比较少，因为个人认为他的精准度不是很高，广告太多，并且看起来，搜索时自己就忽略了自家的百科，看这个关于sendstatistic.exe文件的搜索，两者结果差异很明显，倒是谷歌，忠实的扮演着搜索互联网所有信息的责任，负责的说百度知道。

 

 

 

 

　　注册了一个独立域名，现在通过brucebot.cn就可以直接访问这个博客了,也更方便的记了。